Recently, the awareness of fire safety has become popular. Many people have paid more and more attention to fire pumps as their awareness of fire safety has improved. Some places have begun to pay attention to the selection of fire pumps. In many places, fire control cabinets are installed under the complete fire protection system. In the early years, the fire control cabinet was considered redundant by many people. It doesn't seem to matter, but it is not the case today. The fire control cabinet is not optional, and it is indeed an indispensable member of the fire safety protection system. Why do you say that? Let ’s take a look. Why is there a fire control cabinet under the fire safety system.
The role of fire control cabinet :
1. Strengthen management. Normally, the daily management of the use of fire pumps requires manual operation and maintenance. However, once a large-scale shopping mall is encountered and there are many similar fire pumps, often one or two managers cannot manage them. At this time, it is necessary to With the help of a fire control cabinet. Fire control cabinet can control multiple pumps to ensure the normal operation of the fire pump .
2. Use of fire control cabinet can improve the working efficiency of fire pump. The fire control cabinet can meet the functions that a single fire pump cannot provide, such as the function of starting at the same time. In some dangerous situations, a single fire pump often cannot meet the needs, and multiple fire pumps need to work at the same time to improve the effect of the fire pump and achieve the purpose of timely protection. Through the fire control cabinet to control the operation, startup, shutdown, etc. of all fire pumps, the efficiency of fire pumps can be greatly improved.
3. The fire control cabinet has a fault alarm function. When a single fire pump is working, if there are insufficient water sources, power circuit failures, etc., it is not easy to be found in time, and eventually the fire pump is damaged. With the fire control cabinet, the alarm function of the control cabinet can be used to remind various faults and eliminate them in time to eliminate the hidden dangers of fire pump safety.
CCCF 消防泵控制 柜采用一用一备相互切换的设备，具有手动和自动控制方式，并能接收消防联动信号，在任何工作状态下手动控制优先，具有电源缺相、错相声光报警和输出过载、短路、缺相、三相不平衡等保护功能。 Shanghai CCCF fire pump control cabinet adopts a device that switches between one device and one device. It has manual and automatic control modes, and can receive fire linkage signals. Manual control takes precedence in any working state. It has power phase loss, phase out sound and light alarm and output Overload, short circuit, phase loss, three-phase imbalance and other protection functions. It is also equipped with a surge protection function. 通过检测中心 17 项高强度试验 ，验证合格，可适应与各种环境！ This CCCF control cabinet has passed 17 high-intensity tests of the test center and has passed the verification. It can adapt to various environments!