What are the characteristics of the future development of fire pumps, and what to pay attention to when installing fire pumps
Clicks: 50 Date: 2020-01-11 Select a font size: Small Medium
The best characteristics of a fire pump should be: high materials, high fastness and protection under high conditions; while the chemical medium conveys labor to achieve, it is beneficial to physical health; the expected life cost is the lowest; there may be a Complete chemical buildings are organically connected into one whole. However, under the premise of chemical transfer process, summarizing and presenting the purpose and means of the other request for the use of special chemical pumps, vision. The outstanding characteristics for chemical machinery products are: the performance requirements of mechanical products are related to the transportation and properties of various chemical substances. Of course, the media mentioned here does not refer to water, but oil may be other non-useless substances; but in most cases, chemical media refers to a small amount of additional horrible chemical raw materials; for example, some of the most depressing media ; Some explosives are chemically affected by corrosive media or multi-stage fire pumps containing solid or gaseous media. The change of the chemical composition and the ratio of the chemical elements of the diversified medium will lead to the change of the dielectric properties of the intelligent work, resulting in a higher concentration of the chemical medium or a special sports performance. Therefore, often the purity of chemical media, especially Zhuang Jing's quality requirements, and these particularly strict quality requirements can be easily completed by negotiating the appropriate chemical pump. Through various methods of fire pump media, the requirements for chemical pump varieties are obtained. This makes it difficult for the chemical pump rope system to be a simple standard system. Compared with other borders, such as household appliances, domestic heating, water supply, drainage, etc., as well as chemical finishing of multi-stage fire pumps or in the field of automobile manufacturing, not only in Henan fire pumps are only used in production and standardization. Products Reached the limit. In chemical production enterprises, the standardization of chemical pumps has suffered from technical and economic thorns. The standardization of the production and use of fire pumps is often supported and very reasonable for the first quarrel. But: From a life-cycle cost perspective, what should the most economical standardization look like? Is it specific, standardized, and permanent optimization for a specific use case? Or simple normalization? When can the standardization investment in adopting new technologies and developing new products be completed in a long time? How can both parties have a unified understanding of fire pump standards without the fire pump manufacturer and fire pump manufacturer being injured? These questions can only be answered by strengthening the use of fire pump plants, dialogue between industry associations and chemical plants. Or the processing object is: from the user's point of view, for example, to establish long-term friends with the supplier's lawyer; to establish different standardized levels and comprehensive modular layout definitions at different levels. However, the most critical part of a fire pump is the cost of life. The life of a chemical pump has not yet been fully tapped. Why does this happen? Among many possible answers, one answer is that everyone will be: requirements for different chemical pump performance parameters, service life of chemical pumps and the size of maintenance commitment load, etc. All similar chemical pumps purchase costs, placement costs, fire pumps When the power consumption is not good at work it is relatively easy to check the cost of use and protection treatment. However, it is inevitable that the cost of chemical pump maintenance is difficult to estimate: a reasonable chemical pump is ineffective, and we will be able to determine that it is not the pump that may be damaged, but the frequently changing chemical medium to be delivered and subject to special conditions. Using control, some experienced fire pumps often have great control over the repair costs of another fire pump. The estimated results are also only, but in general, the thick lines are speculative. As the name suggests, the fire pump is a fire pump with full seal, no leakage, corrosion resistance, etc. It is widely used in environmental protection, water treatment, fire department to pump various liquids, and is created to be leak-free. The ideal pump for fire control systems is pollution-free. So, what should we pay attention to when installing fire pumps? Here's how to install and use a fire pump. Five points need to pay attention to the installation of fire pump: 1.2. The fire pump should be installed with a hose check valve at the exit; 3. The fire pump should be lifted by a stainless steel chain and always placed on the lifting screw of the pump set; 4. The pump exit The pipe should be supported on the ground to avoid deformation or damage to the fire pump. 5. Due to the high pressure of the fire pump, the pump is not suitable for couplings. The outlet fire pump should be rigidly connected with metal hoses or pipes. The length of the pipe connected to the pump outlet should extend out of the pool cover and be removed; Method: First of all, the fire pump is a necessary fire protection system equipment, which can increase the pressure, supplement the water and foam, so as to achieve the purpose of fire extinguishing. The equipment uses polymer materials, at the same time, combines advanced technology at home and abroad, but also has efficiency High, safe and reliable, good sealing, corrosion resistance and many other advantages, so it has the impact of other products that cannot be replaced. Second, fire pumps need to pay attention to the importance of correct operation. Professional operators must be available in the pump room to avoid affecting the normal use of the equipment due to improper operation. At the same time, it should also be noted that other irrelevant personnel must not enter the pump room equipment, so as to avoid such errors of improper operation.
Finally, during use, care should be taken to keep the pump room clean. Once pipeline contamination is found, they should be cleaned in a timely manner. In addition to ensuring the cleanliness of the pump room, when cleaning, it should be cleaned in time to keep the equipment clean to avoid being small. Problems and the entire device are not working properly.